Version 4.0

New Features

  • Low battery level indicator
  • Scene Notifications: send notifications to your phone with scene activations
  • HTTP commands are available as part of scene configuration
  • Event list in main GUI shows when a light turned on or off and by whom
  • New device support: Fibaro RGBW controller (FGRGB-101)
  • New device support: Zipato RGBW bulb
  • Battery powered devices will be setup to report in every 12 hours when auto-configured
  • Link to you your InControlHa.com account and InControl will automatically download plugin updates
  • Deadbolt locks now provide the user code when unlocked using the keypad
  • Set configuration parameters via scripts
  • Push notification self-registers with InControl (no need to copy push id from device)
  • Added the ability to queue commands sent to battery opereated devices (view device properties)
  • Room Manager
  • Filter list of devices based on device name or room
  • Set configuration parameters via scripts
  • Version 4.0.5582
  • Added ability via substitution text to use the triggering device for scene notifications and http commands
  • Switched weather providers to Yahoo for a more reliable weather experience
  • Version 4.0.5593
  • Implemented the MULTI-CMD-CLASS to provide extended support for some sensors
  • Added senor reading value for binary report
  • Added decimal values to custom sensor devices & improved readout
  • Added device support for Philio PSM02 4-in-1 sensor
  • Version 4.0.5616
  • Added option to disable secure communications
  • Version 4.0.5635
  • Multiple devices can be added or removed using the tools/z-wave commands menu
  • Fixed binary sensor report for some motion sensors
  • Node reliability map
  • Version 4.0.5640
  • Rename node from mobile app
  • Version 4.0.5696
  • Added option from Help menu to easily located logfile.txt
  • Added ability to perform Network Wide inclusions
  • Version 4.0.5721
  • Added support for LeakZ device
  • Added new feature to send email directly from a scene command
  • Added option to not disable device after failed polled attempts (see tools/options)
  • Read temperature from Smart Strip (perform at least one forced poll to setup the required information)
  • Multi-channel sensor reports will display with the end point name
  • Changed logic for battery level readings to not display on non-battery devices (fix only applies to newly discovered devices)
  • Support for Aeon Labs LED Bulb
  • Version 4.0.5767
  • OTA Update Support
  • Blind and shade controller support
  • Version 4.0.5788
  • New command logic sends "poll" commands to a low-priority queue so they don't slow down user or scene commands
  • Version 4.0.5795
  • Device level history is remembered for 24 hours so "Device At State" conditions that change will be more accurate
  • Energy readings are more standardized with the z-wave specification 
  • "Sensor Reading" box in UI expands to fill available space
  • Added ability to mark a device as offline if the poll failed; previously this was always on and could cause false reports from battery powered devices that were set to poll
  • Version 4.0.5805
  • Support for Aeon Labs Multisensor 5/6
  • Support for Aeon Labs SmartSwitch 6
  • Version 4.0.5817
  • Now the USB stick can be removed and re-inserted without going online/offline
  • Status message to show when USB stick is connected
  • Added the ability to set the local IP address (for use in Sonos MP3 player files)
  • Added occupancy state to rooms
  • Version 4.1.5922
  • Virtual devices able to handle decimal values
  • Added a short history to the readings table for motion and binary sensors
  • Added support for z-wave irrigation controllers
  • Added 'Replace existing device' feature
  • Improved status updates when a device is included using the Android app
  • Version 4.1.6123
  • Support for GoControl Irrigation Controller
  • Autoconfiguration for Aeon Labs multi sensor 6

Bug Fixes

  • Fixed a bug that prevented the parser from working when performing an HTTP command in live mode
  • Fixed a few z-wave controller disconnect problems
  • Fixed a potential memory leak when no z-wave COM port was accessible
  • sendEmail command inside scripts sends email asynchronously, helping to elminate delays caused by slow email servers.
  • Version 4.0.5582
  • Fixed a bug that prevented scene notification devices from being remembered
  • Version 4.0.5593
  • Improved performance for processing commands received from z-wave devices
  • Version 4.0.5696
  • Alphabatized the devices in the scene 'add device' window
  • Fixed a bug that incorrectly identified the Linear appliance module as a garage door opener
  • Fixed a bug that prevented the controller from properly being 'released' after an Inclusion mode took place
  • Version 4.0.5700
  • Fixed "power on" for smart power strip when sent from scene command
  • Fixed display issue related to smart strip outlets when toggled manually from UI
  • Version 4.0.5795
  • Fixed a bug with "kWh" and "W" energy readings replacing each other
  • Version 4.0.5799
  • Fixed a bug that caused newer (v4 CC) kWH energy reports to be mis-interpretted as W reports
  • Virtual devices created from reports no longer rely on the "name" but instead use a unique id (fixes reports of the same name)
  • Version 4.1.5922
  • Fixed a bug where the room could duplicate itself after being deleted
  • Fixed a bug that prevent First Alert smoke alarms from functioning
  • Version 4.1.6123
  • Better battery reporting if device supports it
  • Fixed bug that can sometimes prevent scenes from loading triggers